Auto Oil And Gas Rubber Parts Vacuum Casting
  • Auto Oil And Gas Rubber Parts Vacuum Casting - 0 Auto Oil And Gas Rubber Parts Vacuum Casting - 0
  • Auto Oil And Gas Rubber Parts Vacuum Casting - 1 Auto Oil And Gas Rubber Parts Vacuum Casting - 1

Auto Oil And Gas Rubber Parts Vacuum Casting

Flexible parts are often referred to colloquially as ‘rubber’ parts. Whilst rubber forms a substantial proportion of them, there are also flexible polyurethanes and thermoplastic elastomers to consider.The following is about Auto Oil And Gas Rubber Parts Vacuum Casting.

Send Inquiry

Product Description

Auto Oil And Gas Rubber Parts Vacuum Casting


Flexible parts are often referred to colloquially as ‘rubber’ parts. Whilst rubber forms a substantial proportion of them, there are also flexible polyurethanes and thermoplastic elastomers to consider. In the past few years, our company absorbed and digested advanced technologies both at home and abroad. Meanwhile, our company staffs a team of experts devoted to the development of Reasonable price China Auto Oil And Gas Rubber Parts Vacuum Casting, We're looking ahead to establishing long-term business enterprise associations along with you. Your remarks and recommendations are really appreciated. Reasonable price China Vacuum Mold, Vacuum Casting, Due to our good goods and services, we have received good reputation and credibility from local and international customers. If you need to have more information and are interested in any of our products, be sure to feel free to contact us. We look forward to becoming your supplier in the near future.


1.Product ParameterforAuto Oil And Gas Rubber Parts Vacuum Casting

  

Standard lead time

Up to 10 copies within 15 working days

Standard accuracy

±0.3% (with lower limit on ±0.3 mm on dimensions smaller than 100 mm)

Minimum wall thickness

To ensure that the mold is filled properly, a wall thickness of at least 0.75 mm is necessary. For best results, we recommend a wall thickness of at least 1.5 mm

Maximum part dimensions

The size of the mold is limited by the dimensions of the vacuum chamber (1900 x 900 x 750 mm) and by the volume of the product (maximum volume: 10 liters)

Typical quantities

Up to 25 copies per mold (depending on the mold’s complexity and the casting materials)

Surface structure

High-quality surface finish comparable to injection molding


2.Product Feature forAuto Oil And Gas Rubber Parts Vacuum Casting


Advantages OfAuto Oil And Gas Rubber Parts Vacuum Casting

·Low cost for molds

·Molds can be made in a few days

·Many types of polyurethane resins are available for casting, including overmolding

·Cast copies are highly accurate with excellent surface texture

·Molds are durable for 20 or more copies

·Perfect for engineering models, samples, rapid prototypes, bridge to production

 

3.Product Details forAuto Oil And Gas Rubber Parts Vacuum Casting


Prototyping flexible parts

The advantage of prototyping parts designed from rubber or flexible elastomers such as silicone, is that it enables you to confirm the required rigidity of the material before committing to production tooling. However, prototyping flexible parts can be a challenge!

The quickest option is to 3D print “rubber” or other flexible parts, however whilst they may demonstrate a level of elongation in a variety of harnesses’, their properties fall well short of production intent materials and little can be done to improve the layered surface finish. (Note, flexibility can be achieved through additive techniques but tear strength, chemical resistance and elongation to break will be significantly reduced).

So Shbury will select vacuum casting to produce auto oil and gas rubber parts to increase the tea strength.


3.Product Application for Auto Oil And Gas Rubber Parts Vacuum Casting


Vacuum casting parts are widely used, and almost all products that can use metal parts can be used. Such as aerospace products, auto parts, electronic products, mechanical equipment parts, medical equipment, defense and military supplies.



4.FAQ


Q1:Where can I get product&price information?

A1:Send us inquirye-mail, we will contact you as we receive your mail. 

Q2:How long can i get the sample?

A2:Depends on your specific items,within 3-7 days is required generally.

Q3:What's kinds of information you need for quote?

A3:Kindly please provide the product drawing in PDF,and will be better you can provde in STEP or IGS, send the parts materials, quantity, surface finishing and other requirements to us as well.

Q4: what's the payment terms?

A4: We accept 50% as payment deposit, when the goods is done, we take photoes for your check and you then pay the balance.

For small amount, we also accept Paypal, Paypal commission will be added to the order. For big amount, T/T is preferred

Q5.Are you a trading company or factory?

A5:We are direct factory with 10 experienced engineers and more than 30 employees as well approximate 3,000 square meters workshop area.

Q6. What shall we do if we do not have drawings?

Please send your sample to our factory,then we can copy or provide you better solutions. Please send us pictures or drafts with dimensions(Length,Hight,Width),CAD or 3D file will be made for you if placed order.

Q7. Can we get some samples before mass production?

A7:Absolutely

Q8. What is your MOQ?

Our MOQ is 1pcs, it is also our one of advantage, even you have less budget, or want to reduce the risks before production, we both can accept the less MOQ.

Q9: Will you do 100% inspection or random inspection ?

We will do 100% inspection for samples, random inspection for mass production. When manufacturing, we will control the dimensions , do PQC in mass production.

Q10. How to do if the parts not match with drawings we received?

Contact us immediately, send the pictures and tell us the issues, we will check and repair or re-make the goods with free.

Q11. You will how to ship the parts to me?

When products finished, also passed by our QC, we will ship out the parts to you by DHL, Fedex , or by sea after communication


6.Deliver,Shipping for Auto Oil And Gas Rubber Parts Vacuum Casting

  

Hot Tags: Auto Oil And Gas Rubber Parts Vacuum Casting, Suppliers, Buy, China, Manufacturers, Price, Quotation, CE ,Quality

Related Categories

Send Inquiry

Please feel free to fill your inquiry in the form below. We will reply you in 24 hours.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy